background image

7

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 3: PRE-INSTALLATION

To use either one of these optional mounting solutions on your DIN Rail Fiber Enclosure, remove the green DIN Rail bracket from 
the fiber enclosure. Choose either the magnetic bracket or the “L” shaped bracket for your application.
The Magnetic Bracket can be installed at the following locations on the DIN Rail Fiber Enclosure. Four screws must be used to 
property mount the magnetic bracket to the enclosure.

Š

Š

One Port Enclosure – Only on the side for flush mounting

Š

Š

Two Port Enclosure – On the side for flush mounting and the rear side opposite the fiber ports

NOTE: The magnet bracket adapter uses four high-power rare earth magnets with a rubber coated base. These four magnets 
together have tremendous holding power and should be used on metal surfaces where you may want to mount your DIN Rail Fiber 
Enclosure.
CAUTION: Always use care when handling. Follow the precautions listed below.

Š

Š

Always wear safety goggles when handling large magnets.

Š

Š

Always wear gloves when handling magnets to prevent pinching.

Š

Š

Children should NEVER be allowed to play with Neodymium magnets.

WARNING: Keep magnets at least 7.9 inches (20 cm) away from devices such as sensitive electronic and storage devices, 
mechanical watches, heart pacemakers, CRT monitors and televisions, credit cards, diskettes and other magnetically stored 
media such as video tapes. These devices are all affected by powerful magnets.

FIGURE 3-4. APPLICATION #1, MAGNETIC BRACKET

The “L” Shaped Adapter Bracket can be installed at the following locations on the DIN Rail Fiber Enclosure. Two screws are used 
for to correctly mount the “L” Shaped bracket to the enclosure.  It has oversized cup head holes to allow the user some flexibility in 
mounting to a wide range of relay racks or cabinets.

Š

Š

One Port Enclosure – On the side for flush mounting and the rear side opposite the fiber ports

Š

Š

Two Port Enclosure – On all sides of the enclosure in various locations

Summary of Contents for JPM397A

















Reviews: