11
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 4: INSTALLATION
Big grommet nut
Kevlar yarn
Grommet end tip
Bulk fiber
FIGURE 4-2. SECURING THE FIBER TO THE ENCLOSURE
4.3 STEP 3: TERMINATING THE FIBER CABLE
Before you begin terminating the individual fiber strands, mount your fiber adapter panel to the front of the enclosure.
The DIN Rail Fiber Enclosure accepts only LGX style fiber adapter panels.
1. Install your LGX fiber adapter panel.
2. Begin to individually terminate each fiber strand. Make sure that you provide enough slack inside the enclosure. This is usually
done by providing a service loop.
3. Install and use the stick-on cable management organizers inside the enclosure to keep the fiber neat and manageable.
4. Terminate each fiber strand one at a time, dress the excess fiber with the stick-on cable organizers, and connect them to the
inside of the fiber adapter panel.
