CHAPTER 3: Installation
17
3. Installation
3.1 Inspecting the Standard Patch Panel
Check the unit for possible damage. If anything is missing or damaged, call Black Box at 724-746-5500.
3.2 Mounting the Standard Patch Panel
Consider these factors when mounting the Patch Panel: site environmental recommendations, rack mounting
specifications, and chassis mounting procedure.
3.2.1 S
ITE
E
NVIRONMENTAL
R
ECOMMENDATIONS
When selecting a site to install the Patch Panel, choose a protected area in an environment that is air
conditioned, humidity controlled, and away from large motors and heating units.
We recommend that the site meet the Bellcore/Telcordia NEBS environmental criteria for operating
temperature and humidity.
3.2.2 R
ACK
M
OUNTING
S
PECIFICATIONS
The Patch Panel Chassis mounts in a NEMA standard 19" rack and occupies 5.25 inches (13.3 cm or 3 rack
units) of vertical space.
3.2.3 C
HASSIS
M
OUNTING
P
ROCEDURE
To mount the Chassis on a rack, attach it to the rack with four screws, two through each mounting ear.
NOTE
Use all four screws to secure the chassis properly in the rack.
Figure 3-1. Mounting the chassis in a rack.
