Black Box IT1000, Manual

Page: 28 / 40

26
IT1000 Basic Rate ISDN Tester
SALES: 0870 90 10 750
You should enter the following information :
To e-mail address The address you want automatic e-mails to be sent to. Note
this does not have to be the same as the address where on-
demand emails are sent, these are configured from the
Configure Test button on the main screen
From e-mail address This field must contain an email address in a valid internet
format i.e. name@domain.country.orgtype . When emails are
received from the unit they will appear to come from this
address even if it does not physically exist. If this field is left
blank many SMTP servers will reject the message.
Subject The entry here will appear in the subject field of the e-mail
sent
Max emails/day In order to prevent rogue units sending high numbers of
unwanted emails, this field can be set to limit the maximum
number that can be sent in one day.
Email trigger priority An email is sent when an event equal or higher priority to the
number in this field is encountered. The actual priorities are
predefined, but can be changed in the
Event Codes tab box
(see below).
SMTP server Enter here the address of the SMTP server which you use to
send emails. This information can be obtained from your ISP
or by checking the settings in your regular email client.
ISP Number Enter here the telephone number which you dial to connect to
your ISP
ISP User Name This field must contain the username by which you log into
your ISP.
Do not confuse this with your POP3 / IMAP email
login details.
ISP Password Enter the password which is associated with your ISP User
Name. Please note that the characters typed are not displayed,
so you must type them carefully.
ü
If you do not wish the tester to send automatic e-mails i.e. only to send emails when commanded to do so
through the front panel or the IT1000 Explorer main menu, then set the maximum number of e-mails per day
to zero.