11
CHAPTER 3: Installation
3.1 Unpacking
Carefully remove the Fiber Optic Converter and included equipment from
the container it came in and place the unit securely on a clean surface.
Inspect the container and everything that was in it for damage, and
immediately report any damage you find.
3.2 Placement
Place the Fiber Optic Converter in an area whose temperature is always within
the range of 0 to 40˚C (32 to 104˚F) and whose relative humidity does not
exceed 90% noncondensing.
The Converter should be installed within 5 ft. (1.5 m) of an easily accessible
grounded AC outlet. (The unit’s universal power supply can accept utility
power ranging from 90 to 260 VAC.) Allow at least 3 ft. (90 cm) of clearance
at the front of the unit for operator access. Allow at least 4" (10 cm) clearance
at the rear of the unit to connect and disconnect its power cord.
3. Installation
