background image

5

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 1: SPECIFICATIONS

1.1 GENERAL SPECIFICATIONS   

 

TABLE 1-1. SPECIFICATIONS

SPECIFICATION

DESCRIPTION

Approvals

Unit

FCC, CE, CSA, RoHS, WEEE

Power Supply

TUV, UL

Physical

LED Interface

(1) Power LED button  (deactivated, not used); 
NOTE: Unit automatically powers on when plugged in; must be powered off at the power source. 
(1) RJ-45 Speed LED (green, located on top left of RJ-45 connector):  
   Blinks three times when the network connection is 1000 Mbps, 
   Blinks two times when network connection is 100 Mbps, 
   Blinks once when the network connection is 10 Mbps, 
   Not blinking: No Link to network; 
(1) Activity LED (green, located on top right of RJ-45 connector):  
   Solid green: Link up, 
   Blinking: Activity on the link, 
   OFF: No link

Maximum Distance from CPU 
to Transmitter

EMD2000SE-T: 16 ft. (5 m), DVI-D and USB limitations

Maximum Distance between 
Transmitter and Receiver

328 ft. (100 m), use a network switch to get farther distances

Operating System Support

Microsoft Windows

®

 Vista, XP, Windows 7, Windows 8, Windows 10, Server 2003, Server 2008, Server 2012, LInux

®

Solaris, Mac OS

Connectors

EMD2000SE-T:  (1) DVI input, (1) USB Type B female, (1) RJ-45 network,

 

(1) RJ-45 serial, (2) 3.5 mm audio,  

     

(1) 2.5 mm barrel for power; 

EMD2000SE-R: (1) DVI output, (4) USB Type A female, (1) RJ-45 network, (1) DB9 serial,  

     (2) 3.5 mm audio for SPK and MIC,  (1) 2.5 mm barrel for power; 

EMD2002SE-T: (2) DVI input, (1) USB Type B female, (1) RJ-45 network,

 

(1) RJ-45 serial, (2) 3.5 mm audio,  

     

(1) 2.5 mm barrel for power; 

EMD2002SE-R: (2) DVI output, (4) USB Type A female, (1) RJ-45 network, (1) DB9 serial,  

     (2) 3.5 mm audio for SPK and MIC,  (1) 2.5 mm barrel for power

Dimensions

EMD2000SE-T, EMD2000SE-R:  1.15" H x 6.2" W x 4.2" D (2.92 x 15.75 x 10.67 cm); 
EMD2002SE-T: 1.43” H x 6.2”  W x 4.2” D (3.65 x 15.75 x 10.67 cm); 
EMD2002SE-R: 1.15” H x 6.2” W x 4.2” D (2.92 x 15.75 x 10.67 cm)

Weight

EMD2000SE-T, EMD2000SE-R: 1.18 lbs (0.54 kg); 
EMD2002SE-T: 1.47 lb. (0.67 kg); 
EMD2002SE-R: 1.36 lb. (0.62 kg)

Operation

Default IP Address

EMD2000SE-T, EMD2002SE-T: 192.168.1.22; 
EMD2000SE-R, EMD2002SE-R: 192.168.1.21

Encryption

Secure Sockets Layer (SSL) over TCP/IP, 128-bit between TX and RX, user set between RX and Hyper-V

Default Username

admin

Default Password

The password is blank by default

DDC Support

Built-in/clone of remote

Switching Time

<1 sec

Summary of Contents for EMD2000SE-R

























































Reviews: