26
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 8: OSD FUNCTIONS
8.4 USER VIEWS AND CAPABILITIES
There are three different types of users in the Emerald SE System. Your user type will determine what exactly you will see on your
OSD. For the purpose of this Manual, we show the screen of an Administrator. This means that some buttons shown here may not
be available to other users.
The Emerald SE comes as an unmanaged system and as a managed system. There are some differences in the OSD for these
systems which you may see here..
8.5 CONNECTIONS SCREEN
When a user successfully logs on to the Emerald SE Receiver or Manager, the Connection screen is displayed. This is shown in
Figure 8-4. The connections that a user can make are listed in the connection window. The user logged on is shown
in the top right corner of the OSD.
NOTE: Default_TX
is 192.168.1.22
Default_TX_192.168.1.22
FIGURE 8-4. CONNECTION SCREEN
If the user is an Administrator type, the three buttons on the left (New, Edit, and Remove) will be displayed. These allow the user
to create, edit, or remove connections. For Standard User types, no connections can be created, edited, or removed, so these
buttons are not displayed or are greyed out.
By default, there is one connection called “Default Tx - 192.168.1.22” that defines a connection to an Emerald SE Transmitter
with its factory defaults. A maximum of 32 connections can be defined for an Emerald SE Receiver by default, and these
connections can be shared by users as defined by an administrator (different users can have the same connection). The number of
connections can be increased to unlimited in a managed domain via Boxilla upgrade licenses.
