Chapter 5: Operation
877-877-2269 | blackbox.com
Page 51
LNK
Off: No power or no link
Flashing: Switch refused
link connection due to
incompatible firmware
versions
On: Link established
VID
Off: No power
present or the
video is not locked
On: Power present
and video locked
PWR
Off: No power present
Slow flashing: A firmware upgrade is
being forced by the DCX1000/3000
Switch
Fast flashing: Remote in USB recovery
mode
On: Power present
USB
Off: No power or no active USB
connection
Flashing: USB connection is contended in
shared mode (keyboard LEDs also flash)
On: USB is routed to a DCX SAM module,
either via the DCX1000/3000 Switch or
directly, in a simple extender installation
5.4.5 DCX SAM module - Green and amber status indicators
The green and amber indicators on the link port of each DCX SAM (computer) module provide the following status information:
Green
Off:
No power
Slow flashing: Power present but no data link
Fast flashing: A firmware upgrade is being forced by either the DCX1000/3000 Switch or a DCX-DVR
On:
Power present and link established
Amber
Off:
No power
Flashing: Power present but
no video
On:
Power present and
video locked
5.4.3 DCX-DVR module - Green and amber status indicators
The green and amber indicators on the link port of each DCX-DVR module provide the following status information:
Green
Off:
No power
Flashing: Power present but no data link
On:
Power present and link established
Amber
Off:
No power
Flashing: Power present but
either no video or
video not locked
On:
Power present and
video locked
5.4.4 DCX-DVR module - Red front panel status indicators
The red indicators on the front panel of each DCX-DVR module provide the following status information:
Special condition
PWR
on,
Amber
flashing and
Green
off: Software fault
requiring the DCX-DVR module to be recovered.
See
Configure > Consoles > Remotes
.
Special condition
Amber
flashing and
Green
off: Software fault requiring the DCX SAM
module to be recovered. See