manualshive.com logo in svg

Black Box DCX-VGA, Manual, Page: 38 / 55

Share
Download
Black Box DCX-VGA Manual Download Page 38

DCX Switch

877-877-2269   |   blackbox.com 

Page 38

Click a heading to reorder the whole list in 

ascending or descending order according 

to the entries within the chosen column.

4.9 Configure > Computers > Locals

Each computer connects to a DCX SAM module. This page lists each DCX SAM module and their key details:

Listed in order of the switch port to which they are attached, this page shows various details for 
each DCX SAM module:

• 

Computer Name - the given name for each connected computer.

• 

Firmware - the current internal software version for each DCX SAM module.

• 

Monitor No - an index number for each video display port. The first port for any computer 
will be indexed as ‘1’. Where a computer has more than one video display connected it (by 
using additional DCX SAM modules), this column will show ‘2’, ‘3’, etc. against the secondary, 
tertiary, etc. DCX SAM module(s).

• 

Unique ID - (shown only when the Maintenance > Settings > Web UI Mode is set to Advanced) 
this column displays the unique identifier hardwired into every DCX SAM module. 

View details

See opposite.

Summary of Contents for DCX-VGA
























































Reviews:

No comments