Black Box CSU/DSU MS/DBU Manual Download

Page: 65 / 101

CSU/DSU MS/DBU

Menu Map

3=CONFIG/1=LOCAL/2=DTE OPT/3=DATA FORMAT

Operation

Follow standard operating procedures.

1. When 3=DATA FORMAT is flashing, press the Enter button. The first of

the submenu items is displayed.

1=ASYNCHRONOUS
2=SYNCHRONOUS

Fig. 4-40. Asynchronous or Synchronous Option.

2. Continue with standard operating procedures to select menu options.

At the end of the options, the system briefly displays “Command
Accepted” and returns to the DTE Options menu.

NOTE

If the asynchronous option is chosen, the length of the data bytes must
be selected.

3. Use the number of the desired submenu choice to activate the desired

asynchronous format.

4. Press Enter to enter the selected choice into the system. The system

briefly displays “Command Accepted” and returns to the DTE Options
menu with the Data Format selection active.

Summary of Contents for CSU/DSU MS/DBU





































































































Search results

Summary of Contents for CSU/DSU MS/DBU

Reviews:

Related manuals for CSU/DSU MS/DBU

Brands by name

Popular brands

Black Box CSU/DSU MS/DBU, Manual

Search results

Summary of Contents for CSU/DSU MS/DBU

Reviews:

Related manuals for CSU/DSU MS/DBU

Brands by name

Popular brands