49
CHAPTER 4: Operation
Continue with standard operating procedures to select menu options.
At the end of the options, the system briefly displays “Command accepted”
and returns to the status menu.
1=2047 Pattern—Selects the 2047 pattern
2=511 Pattern—Selects the 511 pattern
3=Stress Pattern #1—Selects DDS Stress Pattern 1
4=Stress Pattern #2—Selects DDS Stress Pattern 2
5=Stress Pattern #3—Selects DDS Stress Pattern 3
6=Stress Pattern #4—Selects DDS Stress Pattern 4
7=Data From DTE
Status Displays
Remote with TP
Test Err—00
Local DTE & Loop—Type of test being performed
Loop 56K—Loop rate
DTE 56K sync—DTE rate and data type
Available interface leads
TR—Terminal Ready Input
SR—Set Ready Output
LLB—Local Loopback Input
RLB—Remote Loopback Input
OFF/ON—State of the respective leads displayed immediately above.
Summary of Contents for CSU/DSU MS/DBU
Page 100: ...99 NOTES ...
