Black Box CSU/DSU MS/DBU, Manual

Page: 59 / 101

58
CSU/DSU MS/DBU
Table 4-6. Network Address Commands.
Front Panel AT Command Description
xx (Decimal) _N=xx Assigns a two-digit Network Address
Submenu 3 Remote Configuration
This option sets up the CSU/DSU MS/DBU to accept or reject remote
configuration commands.
1. Use the number of the desired mode to activate the selection.
2. Press Enter to select the mode.
3. The system briefly displays “Command Accepted” and returns to the
active NETWORK OPT menu with the Remote Config selection active.
Table 4-7. Remote Configuration Commands.
Front Panel AT Command Description
1=DISABLE &P4 Disable Remote Configuration
2=ENABLE &P5 Enable Remote Configuration
Submenu 4 Clock Source
The Clock Source options specifies the timing source for the CSU/DSU
MS/DBU’s internal circuitry. When operating on a DDS network, the timing
should be from network. On a point-to-point private network, one CSU/DSU
MS/DBU must be set for master, the other set for network.