20
CHAPTER 1: HEADLINE
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 3: INSTALLATION
3.1 MOUNTING OPTIONS
3.1.1 MOUNTING PADS AND RUBBER FEET
The mounting pads and rubber feet can be used to hold the extenders in place and prevents them from sliding and falling.
To attach the mounting pads or rubber feet:
1. Remove the protection layer from the mounting pads or rubber feet.
2. Attach the mounting pads or rubber feet to the bottom the units.
3.1.2 MOUNTING KITS (OPTIONAL)
The following mounting kits are available:
Rackmounting kit (part number ACX300-RMK)
Under-desk mounting kit (part number ACX300-DMK)
DIN rail mounting kit (part number ACX300-DRM)
3.2 INSTALLING THE EXTENDER
WARNING! Read and understand all safety information before installing the product.
The units can be set up to access one host computer, or to access numerous host computers. In the case of the latter, an additional
Network Switch must be installed. With a Network Switch, each user can gain quick access to any of the required computers.
Local Unit
Remote Unit
Monitor 2 (User)
Monitor 1
Host
computer
FIGURE 3-1. SINGLE SETUP
