Chapter 3: Installation
724-746-5500 | blackbox.com
Page 27
From the Line
Out socket of
your audio
device
From your
speakers or
the Line In
socket of your
audio device
2 Connect the 3.5mm jack from the Line Out socket of your audio device to the Line In
socket on the rear panel of the
receiver unit.
3 Ensure that the Line In input is selected using the hotkey switch: Once the Wizard DP Extender receiver is powered on, use a
USB keyboard attached to one of the A ports and press the
key
three times
in succession. Then press the
2
key (not from
the numeric keypad), to select
Line In
mode. The
icon will be displayed on screen to confirm your selection.
continued
3.2.9.2 To connect speakers/line in/analog line out
1 Connect the 3.5mm jack from your powered speakers or the Line In socket of your audio device to the Line Out
socket on
the rear panel of the receiver unit.
