Wizard DP Extender
724-746-5500 | blackbox.com
Page 16
3.2.2 Transmitter USB connections
USB connections are made between the host computer and the two sockets on the rear panel of the transmitter unit, labeled
Link A and Link B.
Link A provides low/full speed USB to the three USB ports (all labeled A) that are located on the front panel of the Wizard DP
Extender receiver. The optional Link B provides Hi-Speed USB to the single USB port (labeled B) that is also located on the front
panel of the Wizard DP Extender receiver.
From USB sockets on
the host computer
Note: Low/full speed USB devices can also be used on port B; the transfer speed will be automatically reduced.
The A ports
support USB keyboards and mice only.
3.2.2.1 To connect the USB ports
1 Use one of the supplied USB cables to connect the Link A socket on the rear panel of the transmitter unit with a vacant USB
socket on the host computer.
2 If the USB port B is required (on the receiver unit), use the second supplied USB cable to connect the Link B socket on the rear
panel of the transmitter unit with a vacant USB socket (v2.0) on the host computer.
