SERVICE SETUP
27
4.1 Setup at the Local Unit
After unscrewing and opening the upper shell, please place the device in this orientation: with
the Fiber connectors to the right and the electrical connectors to the left.
The main PCB then will look like this:
Use the diagram to locate jumpers.
DDC
You can select, whether the DDC is taken from internal DDC table or from local monitor or
the DDC information could be downloaded from remote monitor and stored into internal
table.
DDC
JP1
JP2
From internal Table
(default)
From local Monitor
Loading the DDC Information from the
Remote Monitor into the internal DDC
Table (see also below: Loading the DDC
Information from the Remote Monitor into
the internal DDC Table)
Reset of the internal DDC Table to
Default-Values (see also below: Reset of
the internal DDC Table to Default-Values)
JP1, JP2, JP3
Summary of Contents for ACS2028A-MM
Page 4: ...DVI D FIBER KVM EXTENDER 4...
Page 48: ...DVI D FIBER KVM EXTENDER 48 Power Pin Signal inner 5V outer GND...
Page 49: ...NOTES...
