DVI-D FIBER KVM-EXTENDER
26
4. Service Setup
For most applications, you shouldn't need not to make any adjustments to set up your
DVXi/LC KVM-Extender. Under some special circumstances it could be necessary to setup
configuration specials.
For some applications, you may need to open the Local Unit and/or the Remote Unit.
Unscrew the Philips-type screws at both sides at the bottom of the device. Carefully displace
the lower and upper shells of the case.
The diagnostice LED ‘Video OK’ is located at the local unit between the both DVI
connectors
The diagnostice LED ‘Link Status’ is located near to the Fiber-connectors
Fastening
screw on the
bottom of the
device
Fastening
screw on the
bottom of the
device
Diagnostic LED
Video OK
Diagnostic LED
Link Status
(Fiber)
Summary of Contents for ACS2028A-MM
Page 4: ...DVI D FIBER KVM EXTENDER 4...
Page 48: ...DVI D FIBER KVM EXTENDER 48 Power Pin Signal inner 5V outer GND...
Page 49: ...NOTES...
