Black Box ACS2009A-R2, Manual

Page: 17 / 58

INSTALLATION
17
3.2 Interconnection Cable Requirements
To connect the Local and Remote units you will need:
•
DVI, PS2-Keyboard, PS2-Mouse: Connect the supplied KVM CPU cable set to your
CPU (KVM.- Switch, etc.). Please ensure that the connection is tension-free! Devices
AC ACS2228A
•
DVI, USB-Keyboard, USB-Mouse: Connect the supplied KVM CPU cable set to your
CPU (KVM.- Switch, etc.). Please ensure that the connection is tension-free! Devices
AC ACS4222A
•
DVI: Connect the supplied DVI CPU cable set to your CPU (KVM.- Switch, etc.).
Please ensure that the connection is tension-free! Devices AC ACS4222A
•
CATx Cable: Recommended cable: S/UTP (CatX) according EIA/TIA 56A, TSB 36 or
Digital STP 17-03170. Four pairs AWG 24. connection according EIA/TIA 568A
(10BaseT). Use of cables from a higher category (Cat5e, Cat6, Cat7) is possible.
The use of unshielded CATx Cable is possible, because of the higher electromagnetic
noise/sensitivity the device class may not be reached.
The use of flexible Cables (Patch cable) Type AWG26/7 is possible.
Because of the higher loss of the stranded cables, the maximum distance is
reduced to approx. half the value of solid cables.
A point to point connection is required. Having one or more patch panels in
the line is possible and allowed. Not allowed is a connection from the CATx
link interface (RJ45) to any other products, especially telecommunications
or network equipment.
•
Power Supply
Connect the supplied 5V/DC power supplies to the Plug terminal on the rear of both
Local and Remote units.