DVI-D CAT X KVM-EXTENDER
32
4.1 Setup at the Local Unit
After unscrewing and opening the upper shell, please place the device in this orientation: with
the CATx connectors to the right and the electrical connectors to the left.
The main PCB then will look like this:
Use the diagram to locate jumpers.
DDC
You can select, whether the DDC is taken from internal DDC table or from local monitor or
the DDC information could be downloaded from remote monitor and stored into internal
table.
DDC JP1
JP2
From internal Table
From local Monitor
Loading the DDC Information from the
Remote Monitor into the internal DDC
Table (see also below: Loading the DDC
Information from the Remote Monitor into
the internal DDC Table) (default)
JP1, JP2, JP3
Summary of Contents for ACS2009A-R2
Page 4: ...DVI D CAT X KVM EXTENDER 4 ...
Page 58: ...NOTES ...
