manualshive.com logo in svg

Black Box ACR101A-DVI, Manual, Page: 21 / 84

Share
Download
Black Box ACR101A-DVI Manual Download Page 21

Chapter 4: Configuration

877-877-2269   |   blackbox.com 

Page 21

8  The unit is now ready to accept the upgrade files. Open your browser and log into the Wizard DXS - Digital using the IP 

address that was confirmed in the dialog. Once connected, the unit will offer the following screen:

9  Click the ‘Browse’ button and locate the .bin upgrade file that you downloaded earlier. Click the ‘Perform Upgrade’ button. 

The upgrade will take place and its progress will be shown on screen.

10  When the upgrade is complete, click the link ‘Click here to reboot the unit into normal operation’.

4.3.2 Flash upgrade using the dipswitch method 

Use the dipswitch method if the firmware on the Wizard DXS - Digital has become corrupted and there is no access from a VNC 
session. You will need to know the IP address of the Wizard DXS - Digital (the default IP is 192.168.1.42). 

1  With the power off, change dip switch 2 to ON.

2  Power On the Wizard DXS - Digital.

3  Using a web browser go to the IP address of the Wizard DXS - Digital. You should see the upgrade page as shown above.

4  Browse to the .bin file and then click the Perform upgrade button. 

Summary of Contents for ACR101A-DVI





















































































Reviews:

No comments