background image

3

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE 
STATEMENTS 

This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict 
accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and 
found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of 
FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a 
commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user 
at his own expense will be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to 
operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emis sion from digital apparatus set out in the Radio 
Interference Regulation of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques 
de la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.

Disclaimer:
Black Box Network Services shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or 
cost of cover damages, resulting from any errors in the product information or specifications set forth in this document and Black 
Box Network Services may revise this document at any time without notice.

Summary of Contents for ACR1000-CPH-PS-R2


























Reviews: