Black Box 11N 2T2R Manual Download | Manualshive

Page: 52 / 59

background image

724-746-5500 | blackbox.com

Page 51

Chapter 4: Advanced Configuration

4. Advanced Configuration

4.1 Configuration Backup and Restore

Backup all configurations of this access point to a file, so you can make several copies of the access point configuration for securi-
ty reasons.

To backup or restore the access point configuration, follow these instructions:

Click on the Configuration Tool on the left of the Web management interface, and the following screen will be displayed on your
web browser:

Figure 4-1. Backup or restore the access point’s configuration screen.

Table 4-1. Backup or restore the access point’s configuration options.

Option

Description

Backup Settings

Press the Save... button, and you’ll be prompted to download the configuration as a
file. The default filename is config.bin. You can save it as another filename for different
versions, and keep it in a safe place.

Restore Settings

Press the Browse… button to pick a previously-saved configuration file from your com-
puter, and then click on the Upload button to transfer the configuration file to the
access point. After the configuration is uploaded, the access point’s configuration will
be replaced by the file you just uploaded.

Restore to Factory Default

Click on this button to remove all settings you made, and restore the access point’s
configuration back to factory default settings.

«
...
50
51
52
53
54
...
»

Summary of Contents for 11N 2T2R




























































Reviews:

No comments

Related manuals for 11N 2T2R

Brand: Cambium Pages: 103

Brand: Telrad Pages: 10

Brand: wattsonic Pages: 60

Brand: Medialink Pages: 105

nova AX3000 EX12

Brand: Tenda Pages: 16

Brand: Tenda Pages: 72

Brand: Tenda Pages: 92

Brand: BAZOO Pages: 2

Brand: Air Live Pages: 3

Brand: EnGenius Pages: 2

Wireless-N Broadband Router

Brand: Comtrend Corporation Pages: 165

Brand: ELTEX Pages: 65

Ibex-RT-610 Series

Brand: Westermo Pages: 30

Brand: Telstra Pages: 20

Brand: Telstra Pages: 28

Brand: Intellinet Pages: 74

Brand: Minitar Pages: 77

Brand: Zte Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands