USING STATIONARY POWER
TOOLS and POWER TOOL
STANDS
Construct individual m o u n t i n g
boards f o r
the a b o v e e q u i p m e n t , w h i c h c a n b e
moved o n o r o f f o f t h e Wo r k m a t e a s
required.
CAUTION: T h e equipment should b e s e -
curely attached to a mounting board with
screws or bolts. Wear safety glasses when
using p o w e r equipment w i t h t h e W o r k -
mate.
POWER T O O L M O U N T I N G B O A R D S —
Equipment such as a 5" Bench Grinder or
a Drill Stand should b e screwed down t o
a suitably sized b o a r d o r p i e c e o f p l y -
wood, w h i c h h a s a block about 6 " l o n g
attached t o t h e underside. T h e b l o c k
when gripped securely i n t h e Workmate
vise j a w s holds t h e power equipment i n
operating position. A suggested mounting
board assembly is shown in Figure 11.
Figures 1 2 , 1 3 a n d 1 4 illustrate t h r e e
power tool set-ups.
FIG. 11
FIG. 12
FIG. 13
FIG. 14
5