background image

24 • ENGLISH

 

f

This unit is not for use by children and should  

 

only be operated by adults.

 Caution! To reduce the risk of injury or property 

damage:

 

f

Pull cord by plug rather than cord when disconnecting  

 

the AC Charging Adapter from the unit.

 

f

Never attempt to jump-start or charge    

 

a frozen battery.

 

f

To recharge this unit, use only the supplied AC  

 

or DC Charging Adapter.

 

f

Vehicles that have on-board computerized systems  

 

may be damaged if vehicle battery is jump-started.  

 

Before jump-starting, read the vehicle’s owner’s  

 

manual to confirm that external-starting assistance  

 

is suitable.

 

f

When working with lead acid batteries, always make  

 

sure immediate assistance is available in case of  

 

accident or emergency.

 

f

Always have protective eyewear when using this  

 

product: contact with battery acid may cause blindness  

 

and/or severe burns. Be aware of first aid procedures  

 

in case of accidental contact with battery acid.

 

f

Have plenty of fresh water and soap nearby in case  

 

battery acid contacts skin.

 

f

If battery acid contacts skin or clothing, wash immediately  

 

with soap and water for at least 10 minutes and get  

 

medical attention immediately.

 

f

Never smoke or allow a spark or flame in vicinity  

 

of vehicle battery, engine or power station.

 

f

Remove personal metal items such as rings,  

 

bracelets, necklaces and watches when working with  

 

a lead acid battery. A lead acid battery can produce a  

 

short circuit current high enough to weld a ring, or  

 

similar metal object, to skin, causing a severe burn.

 

f

Do not wear vinyl clothing when jump-starting a  

 

vehicle when jump-starting a vehicle, friction can  

 

cause dangerous static-electrical sparks.

 

f

Jump-start procedures should only be performed  

 

in a safe, dry, well-ventilated area.

 

f

Always store battery clamps when not in use. Never  

 

touch battery clamps together. This can cause  

 

dangerous sparks, power arcing and/or explosion.

 

f

When using this unit close to the vehicle’s battery and  

 

engine, stand the unit on a flat, stable surface, and  

 

be sure to keep all clamps, cords, clothing and body  

 

parts away from moving vehicle parts.

 

f

Never allow Red and Black clamps to touch each  

 

other or another common metal conductor — this  

 

could cause damage to the unit and/or create a  

 

sparking/explosion hazard.

 

a)   For negative-grounded systems, connect  

   the 

Positive (Red) clamp to the Positive  

 

 

ungrounded battery post and the Negative  

   (Black) clamp to the vehicle chassis or engine  

 

 

block away from the battery. Do not connect the  

 

 

clamp to the carburetor, fuel lines or sheet-metal  

 

 

body parts. Connect to a heavy gauge metal part  

 

 

of the frame or engine block.

 

b)   For positive-grounded systems, connect  

   the 

Negative (Black) clamp to the Negative  

 

 

ungrounded battery post and the Positive (Red)  

 

 

clamp to the vehicle chassis or engine block  

 

 

away from the battery. Do not connect the clamp  

 

 

to the carburetor, fuel lines or sheet-metal body  

 

 

parts. Connect to a heavy gauge metal part

 

 

of the frame or engine block.

 

f

If the connections to the battery’s Positive and  

 

Negative terminals are incorrect, the Reverse Polarity  

 

Indicator will light (red) and the unit will sound a beep.  

 

Disconnect clamps and reconnect to battery with  

 

correct polarity.

 

f

Always disconnect the Negative (Black) jumper cable  

 

first, followed by the Positive (Red) jumper cable,  

 

except for positive grounded systems.

 

f

Do not expose battery to fire or intense heat since it  

 

may explode. Before disposing of the battery, protect  

 

exposed terminals with heavy-duty electrical tape to  

 

prevent shorting (shorting can result in injury or fire).

 

f

Place this unit as far away from the battery    

 

as DC cables permit.

 

f

Never allow battery acid to come in contact with this unit.

 

f

Do not operate this unit in a closed area or restrict  

 

ventilation in any way.

 Warning! First Aid:

Skin: If battery acid comes in contact with skin, rinse 
immediately with water, then wash thoroughly with soap 
and water. If redness, pain, or irritation occurs, seek 
immediate medical attention.

Eyes: If battery acid comes in contact with eyes, flush 
eyes immediately, for a minimum of 15 minutes and seek
immediate medical attention.

 

f

Important: This unit is delivered in a partially charged  

 

state. Fully charge unit with a household extension  

 

chord (not supplied) for a full 48 hours before using for  

 

the first time. You cannot overcharge the unit using  

 

the AC charging method.

 

f

All On/Off switches should be in the OFF position  

 

when the unit is charging or not in use. Make sure all  

 

switches are in the OFF position before connection to  

 

a power source or load.

 

f

Never insert anything other than the supplied   

 

recommended appliance power/recharging cords into  

 

the 12V DC power outlet on this unit.

 

f

Do not use any accessory that is not recommended  

 

or provided by the manufacturer.

 

f

Do not use this unit to operate appliances that  

Summary of Contents for JS350CC
































Reviews: