Switching on and off
• To switch the appliance on, press the on/off
button (3.2).
• To switch the appliance off, press the on/off
button (3.2) again.
Note! Once the brewing process is complete the
coffee maker will begin the Keep Warm Time.
The ‘BREW’ icon ( ) will go out and the On/Off
indicator light will remain on.
Pressing the ‘ON/OFF’ button (3.2), when the
coffee maker is already on, will cancel the
brewing process / keep warm time and will turn
the coffee maker off.
Anti-drip function
The appliance is fitted with an anti-drip function,
allowing you to remove the carafe at any time,
even when coffee is still dripping from the filter
bowl.
• Take the carafe (4) from the hotplate (5) and
pour the desired amount of coffee.
• Replace the carafe (4) on the hotplate (5)
and allow the remainder of the coffee to drip
into the carafe (4).
Setting the timer
Warning! Make sure that you have put water in
your coffee maker before setting the timer..
• Prepare your coffee by following the
instructions for ‘Adding coffe’ and ‘Adding
water’.
• Press and hold the ‘PROG/AUTO’ button
(3.1) for 3 seconds. The ‘PROG/AUTO’
indicator light will start to flash indicating you
are in programming mode and the display
will show the ‘Automatic Coffee Making
Icon’ ( )
Note! The last programmed time will be
displayed.
• Press the ‘Hour’ (3.3) and ‘Min’ (3.5) buttons
to select the time you want your coffee maker
to automatically start. (AM is indicated in the
upper left hand corner of the clock display
and PM in the lower left hand corner).
• Press the ‘PROG/AUTO’ button (3.1) four
times to set the timer and to exit programming
mode. The pre-set time will be displayed
briefly. The PROG/AUTO’ indicator light will
illuminate and the display will show the
‘Automatic Coffee Making Icon’ ( ). The
coffee maker is now in automatic timer mode.
• When the programmed time is reached your
coffee maker will start to brew the coffee.
Note! To turn the timer OFF or ON press the
‘PROG/AUTO’ button (3.1).
Note! The coffee maker will continue to keep
warm until the programmed ‘Keep Warm Time’
time has elasped, then the coffee maker will
switch itself off.
Setting the keep warm time
• Press and hold the ‘PROG/AUTO’ button
(3.1) for 3 seconds. The ‘PROG/AUTO’
indicator light will start to flash indicating you
are in programming mode. The display will
show the current time and automatic coffee
making icon ( )
• Press the ‘PROG/AUTO’ button (3.1) again.
• Repeatedly press the ‘HOUR’ button (3.3)
until the desired ‘Keep Warm Time’ has been
selected. (1 - 5 hours - default = 2 hours).
• Press the ‘PROG/AUTO’ button (3.1) twice to
exit the programming mode.
• The display will then revert back to the clock.
7
ENGLISH
