Black & Decker CTO6305C, Use And Care Book Manual

Page: 4 / 21

6 5
How to Use
This product is for household use only.
GETTING STARTED
• Remove packing materials and any stickers. Peel off clear protective film from control
panel.
• Wash all parts as instructed in CARE AnD CLEAnIng.
• Select a location for the unit. Leave some space between the back of the unit and
your wall to allow heat to flow without damaging cabinet and walls.
• Insert crumb tray underneath the bottom heating elements.
• Untie the cord and unwind it.
• Plug unit into electrical outlet. 0 00 shows on the digital
display (C).
Important: During the first few minutes of use, you may
notice smoke and a slight odor. This is normal and is not a
cause for concern.
HELPFUL INFORMATION ABOUT YOUR OVEN
• You can change the temperature from ˚F to ˚C by pressing the
▲
and
▼
buttons
simultaneously.
• For your convenience, the unit always remembers the last selected setting unless
unplugged. You can change this setting before the oven begins preheating or once it
has reached the preset temperature and time.
• You cannot change the temperature or time during the preheat cycle. Once the set
temperature is reached, you can then change the temperature or time at any time.
C
$ "65 *0/
THIS OVEN GETS HOT. WHEN
IN USE, ALWAYS USE OVEN
MITTS OR POT HOLDERS
WHEN TOUCHING ANY OUTER
OR INNER SURFACE OF THE
OVEN
THIS OVEN GETS HOT.
WHEN IN USE, ALWAYS USE OVEN
MITTS OR POT HOLDERS WHEN
TOUCHING ANY OUTER OR INNER
SURFACE OF THE OVEN.
CAUTION
• If using convection bake, remember to lower the suggested temperature of a recipe or
package by 25˚F.
Caution: Unit gets hot. NEVER touch outer surfaces, including the glass door. Always
use oven mitt or pot holder.
Position 4
Use upper slots
along oven walls.
Insert rack using a
rack-up position.
Position 2
Use lower slots
along oven walls.
Insert rack using a
rack-up position.
Position 3
Use upper slots
along oven walls.
Insert rack using a
rack-down position.
Position 1
Use lower slots
along oven walls.
Insert rack using a
rack-down position
.
D
SLIDE RACk POSITIONS
There are 4 possible positions for the slide racks. There is an upper and a lower slot;
the rack can also be inverted for 2 additional positions
(D)
.