Black & Decker CS1015, Instruction Manual

Page: 7 / 10

7
OVERVIEW (FIG. 5)
2QRIIVZLWFK
2. Main handle
6HFRQGDU\KDQGOH
6KRH
6DZEODGH
6. Saw blade lower guard
/RZHUJXDUGUHWUDFWLQJOHYHU
8. Saw blade spanner wrench
%HYHODGMXVWPHQWNQRE
10. Outer blade clamp washer
11. Blade retaining bolt
'HSWKDGMXVWPHQWOHYHU
'HSWKVFDOH
%HYHODQJOHVFDOH
6DZEODGHKH[ZUHQFK
ASSEMBLY / ADJUSTMENT SET-P
WARNING: Always unplug saw from
power supply before any of the following
operations.
ADJUSTING THE DEPTH OF CUT (FIG. 6 & 7)
The depth of cut should be set according
WRWKHWKLFNQHVVRIWKHZRUNSLHFH
‡/RRVHQWKHOHYHUWRXQORFNWKHVDZ
shoe.
‡0RYHWKHVDZVKRHLQWRWKHGHVLUHG
position. The corresponding depth of
FXWFDQEHUHDGIURPWKHVFDOH
‡7LJKWHQWKHOHYHUWRORFNWKHVDZVKRH
in place.
‡6HWGHSWKDGMXVWPHQWRIVDZVXFKWKDW
one tooth of the blade projects below
WKHZRUNSLHFHDVVKRZQLQ
figure 7 .
ADJUSTING THE BEVEL ANGLE (FIG. 8)
This tool can be set to bevel angles
EHWZHHQƒDQGƒ
‡/RRVHQWKHORFNLQJNQREWRXQORFN
the saw shoe.
‡0RYHWKHVDZVKRHLQWRWKHGHVLUHG
position. The corresponding bevel
DQJOHFDQEHUHDGIURPWKHVFDOH
‡7LJKWHQWKHORFNLQJNQREWRORFNWKH
saw shoe in place.
ATTACHING THE BLADE (FIG. 9 & 10)
‡7RSUHYHQWVSLQGOHURWDWLRQHQJDJHWKH
SURWUXVLRQVRIWKHVSDQQHUZHQFK
LQWRWKHKROHVLQWKHRXWHUZDVKHU
DVVKRZQLQILJXUH
‡
Loosen and remove the blade
UHWDLQLQJVFUHZE\WXUQLQJWKHKH[
ZUHQFKFRXQWHUFORFNZLVH
‡5HPRYHWKHRXWHUZDVKHU
‡3ODFHWKHVDZEODGHRQWRWKH
VSLQGOHVKDIWPDNLQJVXUHWKDW
the arrow on the blade points in the
same direction as the arrow on the upper
gaurd of the tool.
‡)LWWKHRXWHUZDVKHURQWKHVSLQGOH
with
the larger flat surface against the blade.
‡,QVHUWWKHEODGHUHWDLQLQJVFUHZ
into the hole in the spindle.
7
Tip of tooth
Surface of wood
6
12
8
5
1
2
6
8
10
11