Page 12
SET UP & USE
5. Align the holes i
n the DIAGONAL SUPPORT RAIL,
LB2-1
(UPPER LEFT
BACK VERTICAL POLE) and ANTI-TIP BRACKET as shown below. Insert 35M
(BUTTERFLY SCREW) into the ANTI-TIP BRACKET and insert all the way through
the DIAGONAL SUPPORT RAIL and
LB2-1
(UPPER LEFT BACK VERTICAL
POLE).
Align the holes in th
e DIAGONAL SUPPORT RAIL,
RB2-1
(UPPER RIGHT BACK
VERTICAL POLE) and ANTI-TIP BRACKET as shown. Insert 35M (BUTTERFLY
SCREW) into the ANTI-TIP BRACKET and insert all the way through the
DIAGONAL SUPPORT RAIL and
RB2-1
(UPPER RIGHT BACK VERTICAL POLE).
Installation Sequence
Step1: Add Diagonal support rail.
Step2: Add Anti-tip brackets.
Diagonal Support Rail.
Anti-tip brackets
LB2-1
Step3: Insert 35M screws.
Insert 35M screws
ANTI-TIP
BRACKET
35M
RB2-1
LB2-1
RB2-2
LB2-2
