Black & Decker BEPW1850, Instruction Manual

Page: 10 / 32

English
8
TWO‑YEAR LIMITED WARRANTY
Black & Decker (U.S.) Inc. warranties this product to be free
from defects in material or workmanship for a period of
two (2) years following the date of purchase, provided that
the product is used in a home environment. This limited
warranty does not cover failures due to abuse, accidental
damage or when repairs have been made or attempted
by anyone other than BLACK+DECKER and its Authorized
Service Centers. A defective product meeting the warranty
conditions set forth herein will be replaced or repaired at no
charge in either of two ways:
The first, which will result in exchanges only, is to return
the product to the retailer from whom it was purchased
(provided that the store is a participating retailer). Returns
should be made within the time period of the retailer’s policy
for exchanges. Proof of purchase may be required. Please
check with the retailer for its specific return policy regarding
time limits for returns or exchanges. The second option is
to take or send the product (prepaid) to a BLACK+DECKER
owned or authorized Service Center for repair or replacement
at BLACK+DECKER’s option. Proof of purchase may be
required. BLACK+DECKER owned and authorized service
centers are listed online at ww.blackanddecker.com. This
Register Online
Thank you for your purchase. Register your product now for:
•
WARRAnTY sERViCE:
Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
• Register online at www.BlackandDecker.com /
NewOwner
Repairs
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including
power cord repairs, and brush inspection and
replacement, when applicable) should be performed
by a BLACK+DECKER factory service center or a
BLACK+DECKER authorized service center. Always use
identical replacement parts.
Accessories
WARNING:
Since accessories, other than those offered by
BLACK+DECKER, have not been tested with this product,
use of such accessories with this tool could be hazardous.
To reduce the risk of injury, use only BLACK+DECKER
accessories recommended for this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating
any accessory, please contact BLACK+DECKER call
1‑800‑544‑6986
.
Nozzle Cleaning (Fig. A, G)
If the nozzle becomes clogged with foreign materials, such as
dirt, excessive pressure may develop. If the nozzle becomes
partially clogged or restricted, the pump pressure will pulsate.
Clean the nozzle immediately using the nozzle cleaner.
1. Turn OFF and unplug the pressure washer unit
8
.
2. Turn OFF the water supply.
3. Pull trigger
7 on spray handle 4 to relieve any
water pressure.
4. Remove the nozzle from the spray wand 2 by pulling
the quick connect collar 3 toward the spray wand.
5. Using the nozzle cleaning tool 13 , unclog any debris
from the nozzle.
6. Run water from a faucet or garden hose through
the nozzle.
Cleaning
WARNING:
Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.
WARNING:
Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start‑up can cause injury.
Your BLACK+DECKER power tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
2. Discharge residual pressure by squeezing the trigger 7
until no more water comes out of the spray wand 2 .
3. Engage the spray trigger lock‑off 6 .
4. Disconnect the garden hose from the water intake 11 .
5. Disconnect the high pressure hose 1 from the high
pressure water outlet 12 and drain hose.
Storage (Fig. H, I)
• Store in a dry, covered location above freezing
temperature.
sTORE inDOORs.
• Always completely empty water from high pressure hose,
pressure washer unit, nozzles, and spray wand.
• Nozzles can be stored in the unit as shown in Fig. H.
• Power cord can be stored coiled up around the pressure
washer unit, secured with the cord retaining hooks 16 as
shown in Fig. I.
• High pressure hose 1 can be stored coiled up and
secured to the handle using the supplied hook and latch
strap
26 as shown in Fig. I.