Black & Decker BEMW461ES, Original Instructions Manual

Page: 15 / 16

14
ENGLISH (Original instructions)
15
ENGLISH (Original instructions)
Your charger does not require any maintenance apart from
regular cleaning.
u
Regularly clean the ventilation slots in your tool/appliance
and charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u
Regularly use a blunt scraper to remove grass and dirt
from the underneath of the guard.
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
Warning! Before proceeding, release the bail bar to turn
mower off and wait for the blade to stop.
Problem Possible cause Possible solution
Mower will
not start.
Cord is not
plugged in.
Plug mower into a work-
ing outlet.
Circuit fuse is
blown.
Replace circuit fuse. (If
the product repeatedly
causes the circuit fuse
to blow, discontinue use
immediately and have
itserviced by an author-
ised BLACK+DECKER
service center.
Cord or switch
is damaged.
Have cord or switch
replaced at an author-
ised BLACK+DECKER
service center.
Grass too long. Increase the height of
cut and move machine
to shorter grass to start.
Machine func-
tions intermit-
tently.
Thermal cut out
activated.
Allow motor to cool and
increase height of cut.
Machine
leaves ragged
finish or mo -
tor labours.
Height of cut
too low.
Increase height of cut.
Cutting blade
blunt.
Replace the blade.
Underside
of machine
clogged.
Check underneath the
machine and clear out
as necessary (always
wear heavy duty gloves)
Blade fitted
upside down.
Refit blade correctly.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
BEMW461ES BEMW471ES BEMW481ES
Voltage V
AC
230 230 230
Power inpurt
W
1400 1600 1800
No-Load
speed
min
-1
3500 3500 3500
Height
adjustment
mm 20 - 70 20 - 70 20 - 70
Blade length
cm 34 38 42
Weight
Kg 15.17 15.94 17.17
Hand/arm weighted vibration value:
= 2.5m/s
2
, uncertainty (K) = 1.5m/s
2
.
Sound pressure level at the operator's ear:
L
PA
: 82dB(A); K= 2.1dB(A)
Sound power level L
WA
: 95dB(A); K= 1.3dB(A)
EC declaration of conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
%
BEMW461ES, BEMW4 7 1ES, BEMW4 8 1ES lawn mower
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60335-1:2012 + A11:2014,
EN 60335-2-77:2010
2000/14/EC, Lawn Mower, L < 50cm, Annex VI,
DEKRA Certification B.V. Meander 1051 / P.O. Box 5185
6825 MJ ARNHEM / 6802 ED ARNHEM Netherlands.
Level of accoustic power according to 2000/14/EC (Article 12,
Annex III, L< 50cm):
measured sound power level L
WA
: 95dB(A); K= 1.3dB(A).
guaranteed sound power level L
WA
: 96dB(A).
These products also comply with directive 2014/30/EU,
2011/65/EU. For more information, please contact Black &
Decker at the following address or refer to the back of the
manual.