2-Pack Polarized Indoor Digital Bar Timers
5
IMPORTANT! Review programmed ON/OFF cycles:
Hold down
PROGRAM
to scroll
through all cycles. Stop at any cycle you want to change.
To change any programmed
cycle:
Press
HOUR
,
MINUTE
, and
DAY
as needed to revise any individual cycle's ON/OFF
times. Make sure that the desired day/times selected for all ON/OFF cycles don't overlap any
other ON/OFF day/time settings.
When finished programming desired ON/OFF cycles, press
ON/OFF
until AUTO ON or
AUTO OFF appears in display. AUTO ON turns the appliance on immediately until the next
programmed OFF time. AUTO OFF keeps the appliance off and will turn appliance on at the
next programmed ON time. Timer must be in AUTO ON or AUTO OFF mode for
programmed settings to operate. Plug appliance (such as a lamp) into timer and plug timer
into wall receptacle.
TIMER MODE/TO OVERRIDE THE TIMER:
Press
ON/OFF
until desired timer mode is displayed:
ON: Programmed settings will be overridden; the plugged-in appliance will remain ON.
OFF: Programmed settings will be overridden; the plugged-in appliance will remain OFF.
AUTO ON turns the appliance on immediately until the next programmed OFF time.
AUTO OFF keeps the appliance off and will turn appliance on at the next programmed ON
time.
SECURITY (RANDOM) MODE:
To operate a plugged-in appliance (such as a lamp) in a random pattern while you are away,
to simulate actual use: with timer in AUTO mode, press
CLOCK
once, then press and hold
HOUR
for 3-5 seconds. RND will appear on the display.
In Random mode, the plugged-in appliance will operate in random length on-off cycles. The
appliance will turn on anywhere between 2-30 minutes after the programmed ON time, and
turn off anywhere between 2-30 minutes after the programmed OFF time. The programmed
ON and OFF times must be at least 10 minutes apart.
Note: Timer will operate in Random mode only within a programmed ON/OFF cycle. To
cancel Random mode, press
HOUR
for 3-5 seconds and RND will disappear from display.
Timer will now function using your previously programmed settings.
DAYLIGHT SAVINGS MODE (DST):
Adjusts the timer one hour ahead to accommodate daylight savings. To operate timer in
daylight savings mode, press and hold
CLOCK
for 3-5 seconds until time display advances
one hour and +1h appears on the left side of display.
To cancel Daylight Savings mode, press and hold
CLOCK
for 3-5 seconds until +1h
disappears from display. Clock will move back one hour and timer will now function using
your previously programmed settings.
