Black & Decker BDCDS12, Manual

Page: 6 / 12

6
ENGLISH
6
ENGLISH
(Original instructions)
7
ENGLISH (Original instructions)
Fitting and removing the battery (Not supplied)
(fi g. B)
u
To fi t the battery, line it up with the receptacle on the tool.
Slide the battery into the receptacle and push up until the
battery snaps into place.
u
To remove the battery, push the release button (5) while at
the same time pulling the battery out of the receptacle.
Assembly
Warning! Before assembly, make sure that the tool is
switched off and the battery is removed.
Fitting sanding sheets (Fig. C )
u
Attach a sanding sheet (7) by pressing the 'hooked' velcro
side to the 'looped' velcro underside of the sanding base
(3).
Use
Warning! Let the tool work at its own pace. Do not overload.
Switching on and off
u
To switch the tool on, depress the on/off switch (1) at the
position I.
u
To switch the tool off, depress the on/off switch (1) at the
position O.
Technical data
BDCDS12
Input voltage
V
dc
12
No - load speed min -1 11000 OPM
Oscilating angle
°
2.8
Sanding base surface
mm
2
5078
Weight
kg 0.63 (with battery 0.88)
Battery (not supplied)
BDCB12
Voltage Vdc 12
Capacity Ah 1.5
Type Lithium-Ion
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.Your charger does not require any
maintenance apart from regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
u
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
from the interior.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packag-
ing allows materials to be recycled and used
again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Service Information
Black & Decker offers a full network of company-owned and
authorized service locations throughtout Asia. All Black &
Decker Service Centers are staffed with trained personnel to
provide customers with effi cient and reliable product service.
Whether you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location near-
est to you.
NOTE
u
Black & Decker's policy is one of continuous improve-
ment to our products and, as such, we reserve the right to
change product specifi cations without prior notice.
u
Standard equipment and accessories may vary by country.
u
Product specifi cations may differ by country.
u
Complete product range may not be available in all
countries.
Contact your local Black & Decker dealers for range
availability.
Batteries
Z There are no user servicable parts inside.
6
ENGLISH
(Original instructions)
7
ENGLISH (Original instructions)
u
At the end of your products life return the whole unit
to your service agent or to a local recycling station to
have the battery recycled. Do not throw the unit out with
household waste.