Black & Decker ASD18, Original Instructions Manual

Page: 9 / 100

9
ENGLISH (Original instructions)
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
u
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
from the interior.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and re-
cycling of BLACK+DECKER products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER office at the
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Run the battery down completely, then remove it
from the tool.
u
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
to any authorised repair agent or a local recycling station.
Technical data
ASD18 (H2)
Voltage V
DC
18
No-load speed
Min
-1
0-800
Max. torque
(PTI Rating)
Nm 16
Chuck capacity
mm 10
Max Drilling capacity
Steel/wood
mm 10/25
Charger 905531** typ. 1 905998** (typ. 1)
Input Voltage
V
AC
100 - 240 230
Output Voltage
V
DC
8 - 20 18
Current mA 400 1000
Approx. charge time h 3 - 5 1.5
Battery BL1114 BL1314 BL1514
Voltage
V
DC
14.4 14.4 14.4
Capacity Ah 1.1 1.3 1.5
Type Li-Ion Li-Ion Li-Ion
Battery BL1118 BL1318 BL1518
Voltage
V
DC
18 18 18
Capacity Ah 1.1 1.3 1.5
Type Li-Ion Li-Ion Li-Ion
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) 67.1 dB(A), uncertainty (K) 5 dB(A)
Sound power (L
WA
) 78.1 dB(A), uncertainty (K) 5 dB(A)
Vibration total values (triax vector sum) according to EN 62841:
Drilling into metal (a
h, D
) < 2.5 m/s
2
, uncertainty (K) 1.5 m/s
2
Screwdriving without impact (a
h, s
) < 2.5 m/s
2
, uncertainty (K) 1.5 m/s
2