44
Appendix A
January 2015
bk3000 User Guide
(16-01249-EN-01)
The guide's vertical holes/cm is invalid.
Use valid vertical holes/cm setting.
The guide's vertical offset is invalid.
Use valid vertical offset setting.
The guide's width is invalid.
Use valid guide width setting.
The system time is invalid and has been
changed to %s %s.\n\nThe system time can
be set in the setup menu.
The Video Output Mode has been changed.
The system must be restarted for the change
to take effect.
This transducer cannot be used with this
scanner. Illegal mandatory section in block %i
(%i).
Connect a compatible transducer. See
Product Data Sheet
for more details.
Transducer "%s" cannot be used with this
scanner.
Connect a compatible transducer. See
Product Data Sheet
for more details.
Transducer "%s" cannot be used with this
scanner. A hardware upgrade may solve the
problem.
Connect a compatible transducer. See
Product Data Sheet
for more details.
Transducer motor overload detected on
connector %s. Make sure the transducer can
rotate freely and then start scanning again.
Transducer not recognized because there is
an illegal CRC in block %i.\n
Contact service technician.
Transducer not recognized because there is
an illegal section in block %i.\n
Contact service technician.
Unable to create backup of database due to
%s.
Contact service technician.
Unable to delete backup of database due to
%s.
Contact service technician.
Warning: MTF Raw volume. Measurements
may be inaccurate!
Continue or discontinue.
Warning: MTF Raw volume. Measurements
may be inaccurate. \nDo you wish to
continue?
Warning: Untracked volume. Measurements
may be inaccurate!
Continue or discontinue.
Warning: Untracked volume. Measurements
may be inaccurate. \nDo you wish to
continue?
Warning text
Action (if necessary)
