bk3000 User Guide
(16-01249-EN-01)
January 2015
43
Appendix A
Warnings and Cautions Displayed on the System
This appendix contains a list of warnings and cautions that may appear on the system
if you perform an undesirable action or e.g. type in a wrong setting value. Contact a
service technician if you encounter a persistent problem that can not be solved by the
suggested action(s) below.
The list also covers potential system and transducer malfunctions. Always contact a
service technician if the system or the transducer malfunctions, see Warning GS-w2
on page 11.
Warning text
Action (if necessary)
3D volume will not be displayed on video
output connector.
Adjusting the guide's height.
Adjusting the guide's width.
Clip length has been reduced.
Current date and time (%s) are before the
scanner was last run (%s). Check your system
clock.
Default LCD backlight has not been adjusted. Adjust default LCD backlight.
Failed to read general settings from database. Try again.
Failed to save bodymark catalog.
Try again.
Failed to save label catalog.
Try again.
Frame rate has been reduced.
Import after upgrade has already been
performed once.
LCD Display Color has not been calibrated.
Calibrate LCD Display Color.
Mechanical synchronization error
detected.\r\nScanning has stopped.\r\nThere
may be a problem with your transducer.
Contact service technician.
Parking of the transducer %s failed.
Try again.
The following licenses have expired:\n%s.
Install new license.
The guide's height is invalid.
Use valid height setting.
The guide's horizontal holes/cm is invalid.
Use valid horizontal holes/cm setting
The guide's horizontal offset is invalid.
Use valid horizontal offset setting.
The guide's name is invalid.
Use valid guide name.
