Getting Started with Flex Focus 1202 • BB1911-H • January 2016
3
Before You Start
Before you turn on the system, make sure that the installation has been approved
by a qualified electrician or by hospital safety personnel. For systems with battery
support, make sure that the batteries are charged fully before you turn on the
system.
Turning System On and Off
When you turn the system on or off, you must give the system enough time to save
and recover open files and unsaved data. Otherwise, a serious system failure may
occur that requires technical support.
Caution S-c4:
Never unplug the system from the wall while it is running. Turn off the
system and wait for the light on the keyboard and the ON/Standby button to go out
before unplugging.
To Turn On:
Press ON/Standby button
one
time. Wait until startup screen disappears before you
do anything else.
To Turn Off:
Make sure system is completely up and running. Press ON/Standby button
one
time.
Note :
Always follow the recommended procedure for shutting down your system.
Connecting Transducers
Array Transducers
To Connect:
1. Insert transducer plug into socket with locking lever in 3 o’clock position.
2. Turn locking lever on transducer plug clockwise to 6 o’clock position.
To Disconnect:
1. Freeze image.
2. Turn locking lever on plug counterclockwise to 3 o’clock position.
3. Remove plug from socket.
Mechanical Transducers
To Connect:
1. Align
red
mark on plug with
red
dot on transducer socket.
2. Insert plug in socket.
To Disconnect:
1. Pull back on plug locking mechanism (collar).
2. Remove plug from socket.
1
2
3
