Getting Started with Flex Focus 1202 • BB1911-H • January 2016
10
Note:
The ultrasound image part of the monitor is not touch-
sensitive.
Make sure that the monitor is clean before you start imaging.
If you attach a sterile cover to the lower part of the monitor (to
cover the monitor controls), make sure that the scanned image is
not covered.
Look directly at the monitor, not at an angle, to ensure that your
touch is accurate.
If a monitor key is not highlighted, you cannot use it – you may need to freeze or
unfreeze the image.
To click a monitor control, tap it with your finger or use the touch pad on the control
panel. The monitor reacts
when you remove your finger
, not when you touch it.
To undo a measurement, double click and hold.
For “
More
” lists, use the slide bar on the right to scroll up and down in the list.
Document Pane (Top of Monitor)
Slide your finger down the right side of the pane to enlarge the documents. To browse
through the documents, flick your finger across the thumbnails. Drag to review thumb-
nails.
Special Monitor Controls
Monitor Control Function/Note
Reset
Return to default settings for the exam type
B Gain Near
Adjust the gain in the near part of the image
B Gain Far
Adjust the gain in the far part of the image
Multiselect
When this is on, documents you select are added to a selection.
When this is off, only the one document you select remains selected.
Keyboard on the Monitor
Click
Enter patient
and a monitor keyboard opens for you to enter patient information.
You can also access the keyboard via the
Keyboard
tab.
Shift, Ctrl, Alt and fn Monitor Keys
Use these special keys to type special characters or obtain additional keyboard function-
ality. For example, click
Shift
and then click
5
to type %.
Touch Monitor
