23
RECALL DEFAULT:
Restores the manufacturer default
settings
KEY LOCK:
While exiting the setting screen after enabling KEY
LOCK, all keys except the
key are locked.
Only this key can disable KEY LOCK.
*Simultaneously pressing both
and
keys in the main
screen can also lock keys.
*While entering KEY LOCK state, the display will show an LCK
indicator in the bottom right corner.
POWER ON STATE:
Users can set the output state of the supply
when it is powered on. When OFF is
selected, the power on state configuration
will not be recalled. If LAST is selected, then
at power on the supply will configure to the
last settings before it was turned off
previously. If USER (user defined) is
selected, a prompt will ask for setting output
voltage, current, and output state. Once set,
these values will then apply during the next
power up.
IP CONFIG:
STATIC :
User can input IP address
DHCP :
not supported
IP ADDRESS:
If IP CONFIG is set to STATIC, users can enter a
=
.
= FF
F
=
,
=
.
F
=
,
F
F
L
=
5
F
5
2
=
= F
5
5
2
.
5
5
2
.
5
5
2
.
F
L
Summary of Contents for XLN15010
Page 1: ...Model XLN15010 XLN30052 XLN60026 High Power Programmable DC Power Supply USER MANUAL...
Page 20: ...17 voltage is within the specified range...
Page 111: ...108...
Page 113: ...110...
