69
12.
Press Shift + ⑨ key to enter the Program menu. Press
key to
select <Edit Program> and press Enter.
Run Program
Recall Prog
Edit Program
Exit
13.
The MDL Series with mainframe extension can support a
maximum of 16 channels. 0 represents the MDL001 mainframe
and 1 represents the MDL002 mainframe extension.
□
7
□
5
□
3
□
1
indicates channels 1, 3, 5, and 7 have been equipped with
electronic load modules.
Active Channel
0 : □ 7 □ 5 □ 3 □ 1
1 : □□□□□□□□
14.
Select the channels to be tested. For instance, if you want to
select channels 3 and 5, press number keys 3 and 5. ‘Y’ denotes
the channel is selected. If you want to cancel a channel, press
the number key again to cancel. Then press Enter to confirm
your selection.
Active Channel
0 : □ 7 □ 5 □ 3 □ 1
1 : □□□□□□□□
15.
Select the steps needed to test. For example, if you want to
test 4 steps, press 1 2 3 4 (0 stands for the tenth step). If you
want to cancel a step, press the number key again to cancel.
Press Enter to confirm your selection.
Active SEQ.
0 9 8 7 6 5 Y Y Y Y
16.
If you want to suspend a step, press the number key of the
step. For example, to suspend step 2, press 2. Press the
number key again to cancel. Then press Enter to confirm your
selection.
Pause Sequence
□□□□□□ 4 3 Y 1
17.
To edit the first step of the 4 steps, determine whether you
need short circuit testing on channel 3 and 5. For example, if
channel 3 needs short circuit testing, input 3. Then press Enter
to confirm your selection.
SEQ01 Short CH
0 : □□□ 5 □ Y □□
1 : □□□□□□□□
18.
Set load on time (T
on
). For example, if you need 2s, input 2 and
then press Enter key to confirm.
SEQ01 On Time
=
2.0S
19.
Set load off time (T
off
). For example, if you need 2s, input 2 and
then press Enter key to confirm.
SEQ01 Off Time
=
2.0S
