46
2.
FUNCTION KEYS
Key
Description
Chan
This key is used to switch channels. Every module has its own channel number and can be
selected from the mainframe panel.
Save
This key is used to save parameters. After selecting a channel and editing its parameters,
press the Save key to save your settings into non-volatile memory. Up to 101 groups of
parameters can be saved.
Recall
This key can be used to quickly recall a saved group of parameters from memory.
Setup
This key is used to enter the specific channel’s menu. For example, pressing this key allows
you to set up A/B transient mode and CC/CV/CR/CW/CZ mode. For more details, view the
Menu List section.
On/Off
This key is used to turn the module’s input state on or off. When the synchronization function
in the channel menu is enabled, pressing this key can control the on/off state of all channels.
Trig
This key is used to trigger the electronic load. Select the Manual Trigger mode to use front
panel triggering.
Start
This key is used to start an automatic test.
Pause
This key is used to pause an automatic test. The VFD will display pausing at each step. Press
the key again to test the file continuously.
