29
1
To set voltage offset:
1. Select a waveform to display its menu.
2. Press F3 :OFST to display the offset setting.
3. Use the rotary input knob or the numerical keys to set
the voltage offset.
To turn the voltage offset OFF, repeat the steps above,
but set the offset voltage level to 0.
3.13.4 Storing and Recalling a Waveform
Generator Setup
You can store up to 9 front-panel setups inside the
internal non-volatile flash memory. When you recall a
stored setup, the front-panel settings change to match
the settings in the stored setup.
Storing Setups
To store the front-panel setup:
1. Press UTILITY to display the menu.
2. Press F2:STORE to select the Store mode.
3. Use the rotary input knob to select a buffer number.
Valid buffer numbers range from 1 to 9.
Buffer 0 is a read-only buffer that contains the default
setup/power-on settings.
The function generator will overwrite and store settings
into a buffer that had settings previously stored inside
without a warning.
Summary of Contents for 4007B
Page 1: ...Model 4007B 4013B DDS Function Generator USER MANUAL...
Page 34: ...34...
Page 35: ...35...