25
1
To select the sweep mode, press SWEEP, then press the
function key that corresponds to the desired Sweep
menu option, as shown:
Sweep
Menu
F1: ON/OFF
– Enables/disables the sweep function.
Select between Sweep ON or OFF.
F2: LIN
– Selects the Linear sweep shape.
F3: LOG
– Selects the Logarithmic sweep shape.
F4: SET
– Defines the Sweep Start and Stop
frequencies.
Set Sweep
Menu
3.7 ON Key
Use this key to control the main output signal. When the
output is active, the key will lit. By default, this will be ON
(enabled) from a power-up. This can be changed by
changing the
OUT-ON
settings from the utility menu.
Summary of Contents for 4007B
Page 1: ...Model 4007B 4013B DDS Function Generator USER MANUAL...
Page 34: ...34...
Page 35: ...35...