background image

 

 

SERVICE INFORMATION 

 

Warranty Service:

 

Please go the support and service section on our website 

www.bkprecision.com

 to obtain a RMA #. Return the product in the 

original packaging with proof of purchase to the address below.    Clearly state on the RMA the performance problem and return any leads, probes, 
connectors and accessories that you are using with the device.

 

Non-Warranty Service:

 

Please go the support and service section on our website 

www.bkprecision.com

 to obtain a RMA #. Return the product 

in the original packaging to the address below. Clearly state on the RMA the performance problem and return any leads, probes, connectors and 
accessories that you are using with the device. Customers not on an open account must include payment in the form of a money order or credit 
card. For the most current repair charges please refer to the service and support section on our website. 

 

Return all merchandise to B&K Precision Corp. with pre-paid shipping. The flat-rate repair charge for Non-Warranty Service does not include 
return shipping. Return shipping to locations in North America is included for Warranty Service. For overnight shipments and non-North 
American shipping fees please contact B&K Precision Corp. 
 

B&K Precision Corp. 

22820 Savi Ranch Parkway 

Yorba Linda, CA 92887 

www.bkprecision.com 

714-921-9095 

 

Include with the returned instrument your complete return shipping address, contact name, phone number and description of problem.

 

 
 
 

 

LIMITED ONE-YEAR WARRANTY 

 

B&K Precision Corp. warrants to the original purchaser that its products and the component parts thereof, will be free from defects in 
workmanship and materials for a period of one year from date of purchase. 
 
B&K Precision Corp. will, without charge, repair or replace, at its option, defective product or component parts. Returned product must be 
accompanied by proof of the purchase date in the form of a sales receipt. 
 
To obtain warranty coverage in the U.S.A., this product must be registered by completing a warranty registration form on our website 

www.bkprecision.com

 within fifteen (15) days of purchase. 

 

Exclusions: This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized alterations or 
repairs. The warranty is void if the serial number is altered, defaced or removed. 

 
B&K Precision Corp. shall not be liable for any consequential damages, including without limitation damages resulting from loss of use. Some 
states do not allow limitations of incidental or consequential damages. So the above limitation or exclusion may not apply to you. 
 
This warranty gives you specific rights and you may have other rights, which vary from state-to-state. 
 

B&K Precision Corp. 

22820 Savi Ranch Parkway 

Yorba Linda, CA 92887 

www.bkprecision.com 

714-921-9095 

 

 
 
 
 

Summary of Contents for 2522C



























Reviews: