BK Medical Type 2052, User Manual

Page: 7 / 28

2052 User Guide (BB1804-C) 7
Control Buttons
The transducer has 3 control buttons on the handle.
Figure 4. Transducer control buttons.
The
Start/Stop/Capture
button on the underside of the handle is used to start or
stop imaging. You can specify a user-defined function for a long press (at least one
second) on the button: by default, a long press captures the current image.
The
Crystal Position
buttons (
Forward
and
Backward
) on the upper side move the
crystal assembly.
Beeps
The system emits “beeps” when:
•
The
Start/Stop/Capture
button on the transducer is pressed.
•
The crystal arrives at its default position (0mm – see Fig. 2).
Safety Information
Contact your BK Medical representative if you believe the correct functioning of any
BK Medical equipment is impaired in any way.
Forward (In) button
Backward (Out) button
Start/Stop/Capture but-
WARNING To avoid tissue damage, always keep the exposure level (the acoustic output level
and the exposure time) as low as possible.
WARNING If at any time the system malfunctions, or the image is severely distorted or
degraded, or you suspect in any way that the system is not functioning correctly:
•
Remove all transducers from contact with the patient.
•
Turn off the system. Unplug the system from the wall and make sure it cannot be used
until it has been checked.
•
Do not remove the system cover.
•
Contact your BK Medical representative or hospital technician.