BK Medical 20R3, User Manual

Page: 7 / 26

20R3 User Guide (16-01278-EN-07) General Information
7
Control Buttons
The transducer has 3 control buttons on the handle.
Figure 4. Transducer control buttons.
The Start/Stop/Capture button on the underside of the handle is used to start or stop
imaging. You can specify a user-defined function for a long press (at least one
second) on the button: by default, a long press captures the current image.
The
Crystal Position
buttons (
Forward
and
Backward
) on the upper side move the
crystal assembly.
General Information
Product specifications, acoustic output data and data about EMC (electromagnetic
compatibility) for this transducer can be found in the Product Data Sheet and the
Technical Data (BZ2100) that accompany this user guide.
Forward (In) button
Backward (Out) button
Start/Stop/Capture button
WARNING
GS-w2
If at any time the system malfunctions, or the image is severely distorted or degraded, or you
suspect in any way that the system is not functioning correctly:
• Remove all transducers from contact with the patient.
•
Turn off the system. Unplug the system from the wall and make sure it cannot be used
until it has been checked.
• Do not try to repair the system yourself.
•
Contact your BK service representative or hospital technician.
WARNING
AO-w1
To avoid tissue damage, always keep the exposure level (the acoustic output level and the
exposure time) as low as possible.