BK Medical 20R3, User Manual

Page: 19 / 26

20R3 User Guide (16-01278-EN-07) Endorectal Imaging
19
Using a Rectosigmoidoscope
Insert the obturator fully into the rectosigmoidoscope and apply gel to the outside tip.
Introduce the rectosigmoidoscope as far as the beginning of the rectal ampulla (4–5
cm).
Slowly remove the obturator.
Use the light source and visually inspect the rectum. If necessary, empty the rectum.
Using visual guidance, advance the rectosigmoidoscope to the level of interest – so
that it just covers the area you want to image.
WARNING
Colo-w1
Do not use excessive force during insertion. Do not make excessive lateral movements during
or after insertion. Risk of injury or tissue damage to the patient could occur under certain
circumstances. A digital palpation of the rectum may need to be carried out by a clinician
prior to insertion or use of the probe as a precautionary measure.
WARNING
Colo-w3
To avoid patient injury, if you advance the rectosigmoidoscope or the
transducer/rectosigmoidoscope combination any further into the rectum, you must do it
under visual guidance using the conventional techniques that are approved at your hospital.