BJM Pumps FAHRENHEIT SK-F Series, Installation, Operation & Maintenance Manual

Page: 9 / 64

10
PUMP OPERATION
This pump is designed to handle dirty water that contains some
solids. It is not designed to pump volatile or flammable liquids. Do not attempt to pump
any liquids which may damage the pump or endanger personnel as a result of pump
failure.
Do not operate this pump where explosive vapors or
flammable material exist. Death or Serious injury may result.
TYPICAL MANUAL WASTEWATERING INSTALLATION
NOTE: Maximum recommended starts should not exceed 10 times per hour .
All SK-F & SKX-F Models are provided with a 50’ (15 m) power cable. NEVER splice
the power cable due to safety and warranty considerations. Always keep the lead end
dry.
Do not alter the length or repair any power cable with a splice. The
pump motor and cable must be completely waterproof. Damage to the pump or
personal injury may result from alterations.
The BJM Pumps
®
SK-F and SKX-F series pumps require a special control that
contains the starting components, thermal sensor and Seal Minder
®
connections.
These pumps cannot be directly connected to a power source.