BJM Pumps FAHRENHEIT SK-F Series, Installation, Operation & Maintenance Manual

Page: 42 / 64

17
8) Remove the inspection screw for the oil chamber (pos#50-08). Pour
out a small sample of the oil. If it is milky white, or contains water, then
the oil and possible, the mechanical seal, should be changed. If an oil
change is needed.
9) Remove the screws that hold the oil chamber cover in place & remove
the oil.
10) Replace the mechanical seal if necessary.
11) Replace the oil.
12) Assemble the pump.
STATOR REPLACEMENT OR ELECTRICAL REPAIR
The BJM Pumps ® “F” Series designed pumps utilize unique construction methods and
materials. The interconnection of all wiring requires the use of a BJM
Pumps®
wire
connection kit. Included in this kit are specific instructions on how a qualified factory
trained and certified repair technician can perform this work properly. No other materials
or methods should be used on this product.