7
•
Remove the air check screw on the motor housing. Using an air compressor,
pressurize the motor chamber to 13 psi and check for leaks using a spray bottle.
Repeat this procedure to check the seal chamber for leaks.
•
Inspect the power cable for any damage.
For Storage Periods longer than 3 Years
•
Disassemble the pump and replace all of the O-rings, the Mechanical Seal, Seal
Chamber Oil, and the Lip Seal. Repack the Bearings.
•
Remove the air check screw on the motor housing. Using an air compressor,
pressurize the motor chamber to 13 psi and check for leaks using a spray bottle.
Repeat this procedure to check the seal chamber for leaks.
•
Rotate the impeller shaft by hand prior to startup.
Summary of Contents for FAHRENHEIT SK-F Series
