BizLink RM-826-Q25-WD, User Manual, Page: 37 / 48

Rule
Name
Policy
Source
Address
Video_rule Kids_policy 192.168.1.25
Default
For this you will need two Members set up to do failover.
Member Name Interface Metric Weight
Default_WAN WAN 1 1
Default_modem WAN1 2 1
To handle the traffic from the other devices we need a Policy with the two Members associated
with it.
Policy Name Member Cost
Balance
Ratio
Default_policy Default_modem 2 1
Default_WAN 1 1
Since the WAN has a lower Cost than the modem it will be used for all traffic as long as it is
connected.
And now the Rule. In the Rule we need to identify data packets that go to all destinations
Rule Name Policy
Destination
Address
Default_rule Default_policy 0.0.0.0/0
This Rule will direct all traffic to the Default-policy Policy for handling.
For this Load Balancing System we have created 5 Rules to handle the traffic from the network.
The final step is to order them so that traffic destined for one Rule is not grabbed by another
Rule higher up the list. The most specific Rule must be at the top of the list and the least specific
at the bottom.
A good ordering for these Rules would be :